One-Pack System Application Guide

Our one-pack solutions include our sheds, fences, patio, caravan paints and anything that is acrylic or enamel based.

Resincoat One-Pack Systems have been specially formulated to provide a premium long lasting finish to sheds, fences, concrete and garage walls, depending on their specifications. DIY-friendly, the coating can be applied by brush/roller or, when thinned down, a spray gun. Designed for vertical surfaces, splatter reduction is included for easy application.

This thick formulation provides excellent coverage with just 1 coat required to totally transform and brighten up your outdoor spaces. The coating also includes ducks back additives to ensure rain beads on the surface and runs off quicker, ensuring faster drying, less water penetration and better long-term protection.

Below, you will find out general guidelines for application:

Preparation

• Old paint finishes should be removed if flaking at all. 
• If applying Resincoat Garden Fence Paint to any wooden surface which is polished or smooth, we recommend gentle or light abrasion through some form of sanding all over to provide a key for the product to adhere to. 
• Cover any nearby surfaces in case of overspray. In the case of overspray, however, our one-pack paint can be cleaned off with soap and water whilst it is still wet.

Application with a Roller

• Ensure that the tin of paint has been stirred thoroughly to ensure that all component solid parts in the mixture are evenly distributed.
• Apply your first coat with a brush or roller (start at the corner of painting area and working inwards). Leave to dry for between 4 to 6 hours.
• Apply your second coat (whilst not always necessary, we recommend two coats).
• If you have paint remaining, the tin can be re-sealed and stored for further use.

Application with a Spray-gun

• Ensure that the tin of paint has been stirred thoroughly to ensure that all component solid parts in the mixture are evenly distributed before pouring contents into your chosen spray gun. 
• The formula should be diluted down with up to 10% water. Refer to the sprayer user guide for full instructions before every use.
• Resincoat fence paint should be touch dry within 4 hours. Once coat 1 has been applied, leave to dry for 4 to 6 hours and repeat for coat 2 if required.